FURNACE OIL (F.O)
SPECIFICATION FOR FURNACE OIL (380 cst)
(Export)
| SL No | PARAMETER | SPECIFICATION | STD.METHOD | Typical Analysis |
| 1 | Density @ 15°C g/ml | 0.9900 Max | ASTM D 1298 | 0.9800 |
| 2 | Flash Point (PMC),°C | 66 Min. | ASTM D 93 /IP 34 | 70 |
| 3 | Pour Point °C | +18 Max. | ASTM D 97 / IP 15 | -9 |
| 4 | Micro / Conradson Carbon | |||
| 5 | Ash (% by Mass.) | 0.15 Max | ASTM D 482 / IP 4 | 0.04 |
| 6 | Water content (% by Mass). | 1 Max. | ASTM D 95 / IP74 | <0.05 |
| 7 | Sulphur, Total (% by Mass) | 3.5 Max | ASTM D 4294 | 3.20 |
| 8 | Sediment (% by Mass) | 0.25 Max. | ASTM D 473 / IP 53 | 0.04 |
| 9 | Vanadium( ppm) | 250 | UOP 391 /91 | 170 |
| 10 | Sodium, ppm) | 50 | UOP 391 /91 | 20 |
| 11 | Viscosity, Kinematic 50°C, cSt | 380 Max. | ASTM D 445 / IP 71 | 370 |
| 12 | Potential Sediment (% by ageing) | 0.5 |